* MCPD8_V2-V50_FW0606.mvp

  - Fix wrong parameter values in data packet headers and from cmd=12 (GetParameters).

* MCPD8_V2-V50_FW0605.mvp

  - Fix setting data dest port with cmd=5 (SetProtoParams).

* MCPD8_V2-V50_FW0604.mvp

  - Fix: some times time stamp set to defined value does not work

* MCPD8_V2-V50_FW0603.mvp

  - Fix mpsd-8 sending wrong amplitude and position values in tx_formats 1 and 2.

* MCPD8_V2-V50_FW0602.mvp

  - Fix bus communication failure after issuing the 'SetMpsdTxFormat (cmd=25)' command.

* MCPD8_V2-V50_FW0601.mvp

  Firmware for the new MCPD-8_v2 modules (Ethernet port is on the rear side of the module).

  * Changes from FW0600:
    - fix common gain setting
    - two commands were sending only to bus0
    - MCPD ID mirrored back

--------------------------------------------------------------------

* MCPD8_V4x_FW0527.mcs

  Firmware for the older MCPD-8_v1 modules.